Description:
The bi-directional PD fast charging module can realize the fast charging of input and output. If you use a fast charger to charge the power bank, a fast charge can be achieved. And when charging other devices, fast charging can also be achieved.
Special feature:
Use good materials and is more durable.
2>.Exquisite portable.
3>.Easy to install.
The simplicity of the operator is practical.
5>.High performance.
Parameters:
1>.Product Name: Bidirectional PD Fast Charging Module with 120W BMS
Master controller: CS32G020K8U6 + SC8812.
Power: 120 W (max).
Power supply: welding.
Standard voltage: 4 x 12 ~ 16.8 V.
6>.Output Voltage: 5V/9V/12V/15V/20V
Output current: 5 A/6 A.
Module housing: no.
9>.Fast charging indicator: yes.
Battery indicator: yes.
11>.Change values:No
Low voltage protection: yes.
13>.Working temperature: -20℃~85℃.
Working humidity: 5% ~ 95% RH.
Size: 49 x 32 x 11 mm.
Announcements:
1. The module must be connected to the battery, idle is not allowed (idle refers to the Type-C port that is charged but the battery is not connected).
2. Charging activation is required for the first use. Do not use a power supply to avoid damage to the module.
3. The Type-C port of the product can only be connected to electrical devices or chargers.
4. Do not connect the products Type-C connector to the Type-C port of another module, as this may cause non-detection or even failure.
5. Pay attention to the positive and negative wiring, as the reverse connection will damage the product.
Package:
1 x fast charging module.