Feature(may vary by option.)

●Designed for 3 series lithium battery, can be used for lithium battery set of 11.1 V, 12 V, 12.6 V
●Multiple protection functions include overcharge protection, over-discharge protection, over-current protection and short circuit protection
●Automatic shut-off of protection after protection conditions, easy to use
●Less than 30uA quiescent current, low power consumption
●Extend the life of your battery

[1#：9-10A]

[2#：10-13A]

Description

Technical data:
Type (optional): # 1 (9-10A), # 2 (10-13A).
Model: 1 #: HX-3S-01, 2 #: HX-3S-FL10-A.
Size:
# 1: 50 x 16 x 1.0 mm / 1.97 x 0.63 x 0.04 inches.
# 2: 53 x 17 x 4.0 mm / 2.09 x 0.67 x 0.16 inches.
Surge range: 4.25-4.35V ± 0.05V.
Over discharge voltage range: 2.3-3.0 V ± 0.05 V.
Maximum operating current: 6-8 A.
Maximum transition current: #1: 9-10A, #2: 10-13A.
Standby current: 003c30uA.
Internal resistance: 003c100mΩ
Charging voltage: 12.6 V - 13 V.
Working temperature: -40 ~ + 50 °C.
Storage condition: -40 ~ + 80 °C.
Effective life: 0026 gt; 30000 hours.
Short circuit protection: yes, delayed self-utilization.
The component contains:
# 1: 1 piece S-8254AA protection chip, 4 pieces AO4407
# 2: 1 piece 2110-cb protection chip, 2 pieces AOD472

Notes:
1. Higher than 3A current discharge product, the discharge of the battery discharge is over 3C.
2. Multiplier calculation formula: 1C battery, 2000 capacity is equal to 2AH x 1 = 2A maximum working current.
3C ratio battery, 2000 capacity is equal to 2 Ah x 3 = 6 A maximum working current.
3. In the process of use, when the battery is heated, the battery power is not applicable. This situation cannot be used for a long time. Otherwise, the battery will soon be damaged.

Box contents:
1 x PCB protection board (assembled).