The Miller H-Design safety harnesses are the new generation of safety harnesses for the construction and general industry that provide greater comfort, freedom of movement and safety for workers. Miller H-Design Duraflex 2-point harness with 2 front webbing loops and automatic buckles on chest and leg straps size 2. Shoulder Strap: Duraflex stretch webbing 44.5mm PES with PTFE treatment (water resistant/stain resistant) Colour: green with black drawing. Breaking strength: >2200daN Other Straps: Black Standard Webbing 44mm PES with PTFE treatment (water resistant/stain resistant) Breaking load: >2700daN Rear carabiner: material: steel surface: galvanized silver, breaking load: > 2300 daN anchor point on the sternum: long webbing loops Automatic aluminium buckles: breaking strength: >900 daN Steel buckles: surface: galvanized silver, breaking load: >900 daN Weight: 1.10 kg Breaking strength: > 15 KN Temperature: -30 °C up to +50 °C EN 361 full body harness. Certified for a maximum load of 140 kg. The service life of our harnesses is 10 years from the date of manufacture. Some factors can help reduce the performance or life expectancy of the product: incorrect assembly; incorrect use; fall catching; mechanical deformation or cuts; contact with chemical products (acid or alkali); exposure to extreme heat sources > 60°C; exposure to UV rays. Please keep in mind that the product must be checked by a qualified person at least once a year. This inspection must be registered. Before each use, the product must be visually checked by the user. The statutory annual inspection is crucial whether or not your PPE should be used again.