You are purchasing 1 x 30 ml UV builder gel cover, milky, thick viscosity. It is a thick viscosity all-round gel for an unforgettable shine. Easy to work with. Thanks to the honey effect, the gel itself is smoothing and does not flow into the nail edges. Thus, re-filing is hardly necessary. This gel can be modeled very well, suitable for all three layers. Please use a light curing device with at least 48W power. Application: roughen the natural nail and thoroughly degrease and clean with cleaner. Apply primer if necessary and allow to dry. Depending on the model, apply 2 to 3 times thinly and cure. Do not model up to the nail edges or up to the cuticles. Remove the sweat layer last or seal with a gel without a sweat layer. Tip: the medium viscosity is set to 18 - 20 °C. You can adjust the viscosity to your needs by cooling in the refrigerator or heating in a water bath.
Keep out of reach of children. In case of contact with eyes, rinse thoroughly with water and consult a doctor. In case of contact with skin, rinse thoroughly with water. Use in well-ventilated rooms. Do not use on injured or inflamed nails. In the event of skin redness or allergic reactions, stop contact with the product immediately and, if necessary, See a doctor.