Feature(may vary by option.)

●Easy to install: users only need to observe the installation process. The installation is simple and convenient, easy to use and maintain.
●Appropriate design: this is a self-locking (bistable) two-pole double throw relay. After triggering, the relay retracts, triggers again and the relay opens.
●High safety: low pulse control mode, the safety of the user can be guaranteed during use, and the safety performance of the product is good.
●Stable performance: our products are made of high quality electronic components, complete accessories, stable and reliable performance.
●Indicator: When the product is in operation, it has an power indicator and a reverse polarity indicator, which can clearly show the working status and provide the user with a good experience.

[DC6-24V]




[DC5V]





Description

DPDT relay moduleDPDT relay module
DPDT relay moduleDPDT relay module

Package list:

1 x DPDT relay module

relay module,DPDT relay module,self locking relay module,relay module switch,DPDT relay board

DPDT relay moduleDPDT relay module
DPDT relay moduleDPDT relay module
DPDT relay moduleDPDT relay module

Features:

This is a self-locking (bistable) two-pole switching relay. After triggering, the relay tightens, triggers again and the relay is disconnected. With power indicator and reverse polarity indicator. Low pulse control mode, safer to use. Made of high-quality electronic components, stable and reliable performance. Easy to install and convenient to use.

Specification:

Input voltage: DC 5V (5V version), DC 6-24V (12V version) (optional)

Module working current: Forward 2MA, backward 60-70MA

Load current: 5A maximum (motor <= 3A)

Control mode: Low pulse control

Size: approx. 39.5 x 33.3 x 23.3 mm / 1.6 x 1.3 x 0.9 inches

Pin Description:

V: Power positive

G: Negative pole of power supply and earth connection of the trigger signal;

T: Trigger signal input (0.2-2 seconds low pulse)

NO1: Relay Closer Port

COM1: Shared relay port

NC1: Relay Opener Connector

NO2: Normally open relay connection

COM2: Shared relay port

NC2: Relay Opener Connector

Application: When switched on, the relay is switched off. Click on the trigger port (T-connector) to retract the relay, click the relay to release it again, and so on.