Feature

●MAX7219 allows it also the user to each of the data selection code or code
●Each data can be update solved & theres no need to write the whole display New
●A comfortable four wire Serial Interface Puš ° all Generic, microprocessor can then be connected
●Only need to apply 3 IO mouth Puš ° A grid fahren that shows lattice flicker, Kaskadierungs support
●It includes a little piece of replacement type B BCD to code, more Abtastsc posture, the period of the actuation word, but also a 8 – 8 static RAM, to save all data,

Description

Dollatek trademark reg. no. 013726393
There is a type of serial input/output common cathode Display Driver to install. It combines the great microprocessor to Achtstelligen up to seven period of the digital LED display, ladder ° can also be found on the bar display or 64 independent LED to be used.
Description:
MAX7219 also allows the user to each of data, Code or code
Each data can be update solved and never need the entire display rewrite
A convenient four wire serial interface Puš ° all general purpose microprocessor.
Only need to apply 3 IO mouth Puš ° A grid, shows lattice flicker, Kaskadierungs support
It includes a little piece of type B BCD Code Neutralizer, more Abtastsc posture, the period of the actuation word, but also a 8 · 8 static RAM, to save all data,
Material: PCB
Surface Colour: Green
Operating Voltage: 5 V
Hole screws: approx. 0.12inch/3 mm
Dimensions (L x W x H): approx. 2 x 1.3 x 0.6 inch/5 x 3.2 x 1.5 cm
Package includes::
1x Dollatek MAX7219 lattice module
5 x Dollatek cable
Instructions:
The left side panel for easy access connection and the output port on the right hand side.
A single module to check, simply plug the gate to the CPU.
If the Cascade Pisz module of the input terminal of the first module is connected to the CPU, the output port is connected to the input port: of the second, and Cosš ¬.