Feature

●Wide application: can be used for making LED screens, LED walls, advertising boards, widely used in hotels, KTV, bars, outdoor advertising signs, Christmas or wedding decoration
●Support control: you can use the MCU to communicate with the module via I2C, the AIP1640 chip control module with 128 LEDs on and off, so that the module on the grid shows the desired pattern
●Technical parameters: operating voltage of DC3.3-5 V, power loss for 400 mW, oscillation frequency is 450 kHz, drive current is 200 mA
●Lamp bead and chip: the LED light board comes with 128 LED beads, with AIP1640 chip, stable and reliable
●Temperature resistant: operating temperature from -40°C ~ +80°C, high and low temperature resistant, communication mode with I2C communication


Description

Feature:
1. Lamp bead and chip: LED light board with 128 LED beads, with AIP1640 chip, stable and reliable
2. SUPPORT CONTROL: you can use the MCU to communicate with the module via I2C, the AIP1640 chip control module with 128 LEDs on and off, so that the module on the grid shows the desired pattern
3. Wide application: can be used for making LED screens, LED walls, billboards, which are widely used in hotels, KTV, bars, outdoor advertising signs, Christmas or wedding decoration
4. Technical parameters: working voltage of DC3.3-5V, power dissipation for 400mW, oscillation frequency is 450kHz, drive current is 200mA
5. Temperature resistant: operating temperature from -40°C to +80°C, high and low temperature resistant, communication mode via I2C communication.

Specification:
Item Type:LED Matrix Control Module
Operating voltage: DC3 .3-5 V.
Power loss: 400 mW.
Oscillation frequency: 450 KHz.
Drive current: 200 mA.
Operating temperature: -40°C ~ +80°C.
Communication method: I2C communication
Board size: approx. 32 x 72 mm / 1.26 x 2.83 inches.

Use:
Configure the controller and connect the ports for use.

Package list:
1 x light board.