Functions:
1. Mutual inductance current monitoring has high accuracy of current detection and safe separation of input and output.
2. Self-powered, no external power supply required.
3. Easy to install and use, no need to connect DC into the circuit when you measure.
4. Measured current AC 0-10/20/50A, output signal DC 0-10V.
5. Continuity structure design, insulation can withstand voltage up to 2000 V.
6. The hysteresis is less than 1% and can be used under strong magnetic conditions.
7. The outer casing is made of self-extinguishing ABS material.
8. Can be used for AC current measurement and monitoring, AC motor overload protection, electronic switches of automatic control system and so on.
Specification:
Model: SZT15-CH-10V.
Supply Voltage: Not Required
Output Type: 0-10V DC
Input continuity current: AC 0-10A/20A/50A.
Switch-on minimum: 0.5 ± 0.2 A.
Maximum overload of the forward current: 200%.
Accuracy: ± 1%.
Power consumption: 1 W.
Leakage current: 1 mA.
Hysteresis: 1%.
Linearity: 10%-100%.
Through wire diameter: 0.35-20 mm.
Response time: 200ms.
Dielectric strength: 2000VAC 50/60Hz 1min.
Working environment: -20 ~ 60, 5-95% RH.
Dimensions: 61.5 x 90 x 26 mm / 2.4 x 3.5 x 1.0 inches.
Hole diameter: 20 mm.
Package weight: approx. 107 g.
Package includes:
1 x AC transmitter.
Note:
1. Due to the difference between monitors and light effects, the pictures may not reflect the actual colour of the item.
2. Please allow slight errors due to manual measurement. Thank you for your understanding.