Proximity Switch Capacitive 18 mm PNP NO closer
This sensor detects unlike inductive proximity switches also non-metallic objects from a wood, plastic, glass, ceramic, etc.
Comes complete with two fixing nut
With switch LED for status display
Mehrgang trim Mpoti to sensitivity setting
3 core technology
Dimensions: Charm Length 79 mm wide thread M18 x 1
Operating Voltage: 6 – 36 V/DC Direct Current
Maximum output current 300 mA
Output: PNP/NO (N/O Contact) Output is active come on when it senses Lava cascade upon
For Nichtbündigen installation
Operation distance: 1 – 20 mm depending on sensitivity setting and material Max 8 mm at non-metallic materials and Max. 20 mm Metal as they do not overheat during.
Please note, there is also the shape and size the maximum shortest switching distance a lot. Smaller than 30x30x3 mm curve material and pieces to poor.
Connection cable: 1.8 m 3 core Brown = plus – Blue = negative, Black = Output
Please close the sensor that exceeds the included connection on, otherwise it may be damaged.
Please note to PNP/NPN Output
In the event of a sensor with PnP Output is at the end plus potential at all. If you would like to e.g. a relay switch, put the A connection the relays reel on negative, and the other to connect to the OUTPUT.
In the event of a sensor with NPN Output is located on the output negative potential at all. Insert the the living connection the relays reel on plus, and the other to connect to the OUTPUT. -