Feature(may vary by option.)
●Professional design: tubeless tyres specially designed to replace the original Niu KQI3/kqi 3 pro front or rear wheels. Increase the adaptability of electric scooters, so electric scooters can take you to more places.
●Excellent non-slip resistance: the tyres have been specially developed for off-road scooters, with deeper patterns and a wider profile size, the tyres have stronger adhesion and cushioning power. Make the driving experience more comfortable.
●Safe travel: VOLOHAS vacuum tyres are thicker than normal tyres, have good impact resistance and make driving more stable. The scooter is easier to control even in rain or snow and offers you maximum safety.
●Highly elastic soft rubber: made of high-quality natural soft rubber, its elasticity is better than that of hard rubber. The scooter wheel tyre has a high tear resistance, scratch and impact resistance, puncture resistance, durability and extends the life of the tyre.
●Excellent features: compared to tyres with inner and outer tubes, the tubeless tyre is more convenient to install and use, wear-resistant and puncture-proof. Compared to the solid tire, the tubeless tyre is more conducive to shock absorption and speed. Equipped with a matching tubeless tyre inflation nozzle, easy to use.
[Repairable | 1 piece]
[1 Items]
[Repairable pack of 2]
[Pack of 2]
Description
|
|
|
|
|---|---|---|
|
Highly elastic sealing tyre lip The bead fits snugly to the wheel hub, creating a relatively airtight zone. When the air pressure is generated, the two tire lips are stretched outwards by the inner air pressure until they fit completely into the hub groove. |
Evenly thickened inner wall Inside the tyre there are several structural layers that ensure even pressure on the inner wall of the tyre and can effectively absorb shocks and vibrations. |
Off-road non-slip layer The non-slip groove on the outside of the tyre is deeper. The combination of diagonal grooves can improve the adhesion of the tyre, which prevents the tyre from slipping and increasing safety. |
How do I install tubeless tyres?
Step 1:
Mount the valve on the steel ring.
Step 2:
First, insert the tyre lip into the rim of the wheel hub on one side and adjust the angle so that the tyre lip fits the edge of the wheel hub.
Step 3:
Place the rim and tyre on the floor (a pallet would be even better) and leave the tyre on top of the rim. Press the bead completely into the hub with a tool, such as a wrench.
Step 4:
When the tyre lips are pressed into the rim on both sides, press the place near the tyre lips together with your hands so that the two tyre lips are close to each other and form a closed area. Then press the two sides firmly to the position of the air nozzle with your hands, fully embed the tyre lips on both sides and then you can inflate.
Step 5:
The vacuum air nozzle injects air from the inside, and in the previous step, the two bead lips are compressed to create a relatively airtight zone. When the air pressure is sufficient, the two tyre lips are stretched outwards due to the internal air pressure until they fit completely into the groove, and the assembly of the tubeless tyre is complete.
Please note:
After assembly, check the dynamic balance of the wheel and charge the tyre pressure according to the season. In addition, manual installation is not recommended for efficiency and safety reasons, as this is generally performed by skilled workers on mechanical workbenches.