[Schwarz & Schwarz]
The Club Bike Clip is the worlds smallest bike storage solution. It is a stylish, almost invisible bike storage solution that is perfect for cyclists who have little space to store their bikes. With a weight of less than a kiwi fruit, CLUG magically holds your bike on the wall by pressing the front tire while the rear tire sits on the floor. Simply roll up the bike and lock it in place. It is like a hug for your bike.
Features: CLUG packaging is just as minimal and useful as the product itself. In the box you will find all the hardware you need to bring your club to the wall. Supplied with two screws and drywall anchors (except MTB which should be mounted directly on a wall bolt) For DIY enthusiasts and enthusiasts alike, each club package can be folded out to become a practical installation guide. You can even drill through the guide holes, so that dust or dirt fall directly into the box.
Installation: Its super easy! Simply follow the instructions in the field or view the link below to view the steps online. The bracket is fixed with two screws and dowels (included). You will get up in no time.
Box contents:
A Clug bicycle clip. Two screws, two drywall plugs, installation manual assembly template.
Ideal for: Mounting type: horizontal or vertical
Roadie Road, touring and road bikes.
Tyre width: 23-32mm
Hybrid: Hybrid, Commuter and Midrange Tyres
Tyre width: 32-42 mm
MTB: Mountain bikes or fat tire bikes.
Tyre width: 42-62mm
MTB XL: MTB XL mountain bike.
Tyre width: 58-69mm
XXL plus: XXL Plus mountain bike
Tyre width: 70-81mm
Note: When installed vertically, Clug requires the rear tyre on the floor. Clug does not support the dependant weight of your bike.
|
|
|
---|---|---|
Measure your tyreThe size range shown is based on your actual physical tyre width. It is best to go into old fashion, get your ruler out and measure the tyre width. Finally, choose the appropriate lug size to give your bike the perfect hug. |
Size: RoadieThis size is designed for road bike tyres, small and slim. If your tyre is between 23 and 32 mm thick, this is the right size for you. |
Size: HybridThis size is designed for hybrid tyres - comfortable and wide but not too tricky. If your tyre is between 33 and 42 mm thick, this is the right size for you. |
|
|
|
---|---|---|
Size: MTBThis size is suitable for mountain bike tyres - crisp and ready to crush trails. If your tyre is between 44 mm and 57 mm, this is the right size for you. |
Size: MTB XL.This size is designed for the ultimate trail tyre that can be used to crush any line. If your tyre is between 58 and 69 mm thick, this is the right size for you. |
Size: XXL PlusThis size is designed for the greasy, ultra-grippy tyres that keep your bike moving and ready to ride on the track. If your tyre is between 70 and 81 mm (2.75 - 3.2 inches) tall, this is the right size for you. |
|
|
|
|
---|---|---|---|
Step 1: Do you have the right flight?If you have not done it yet, you must check if the clug you supplied has the correct size for your tyre. As a handy guide we have also attached the maximum and minimum sizes for each clug directly to the side of the box. Simply stick it to your tyre and check if it is within reach. Note: Clug is a tiny bike stand that works with your floor to store your bike. Clug cant hang your bike, it doesnt work so and you could hurt your back when trying to get it. We wouldnt want this. |
Step 2: Position and alignmentTime to find out where your flight goes. Once you have found your wall section, you can mark the hole spacing precisely using the alignment aid on the box. If you keep your bike in the desired position (you can be assisted by a friend here), you want to align the position of your clug to the centre of the wheel where the tyre touches the wall. |
Step 3: Drills, holes and anchor.You will need to drill some holes if you place the plug on a different surface than wood (or a bolt in the wall). For drilling, simply glue the stencil to the wall and drill through the guide. If you have drilled holes, insert the dowels from your box into the holes so you have something to screw. |
Step 4. Screws, clip and handleSeparate the clipper from the gripper and screw the clipper into the wall. You can make small adjustments before tightening the screws to ensure your clug is straight. Snap the gripper into place to cover the screw heads and youre ready to go! |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|
Club Roadie | Club hybrid | Club MTB | Club MTB XL. | Club Plus XXL | |
Tyre type: | The original clug has been designed to fit the skinny tyres of your racers and urban fixies. | Designed to fit these comfortable, urban commuter tyres that you and your sweet body in the city in style. | This Clug fits the greasy, crisp tyres you have as a single tracker. | Designed for the ultimate trail tyres that fit any line. | For the greasy, ultra-grippy tyres that keep your bike moving and ready to go on the track. |
Tyre size range: | 1 - 1.25 inch / 23-32 mm | 1.3 - 1.75 inches / 32 - 42 mm. | 1.75 - 2.25" / 44 - 57 mm | 2.3 - 2.7 inches / 58 - 69 mm. | 2.75 - 3.2 inches / 70 - 81 mm. |
Assembly: | Vertical or Horizontal | Vertical or Horizontal | Vertical or Horizontal | Vertical or Horizontal | Vertical or Horizontal |
Product Size: | 1.6 x 1.6 x 1.4 inches. | 2.2 x 2.2 x 1.6 inches | 3.2 x 3.2 x 2 inches | 3.7 x 3.7 x 2.16 inches | 3.9 x 3.9 x 2.16 inches. |