Type | Non-insulated voltage converter |
Input voltage | DC 12 V (9 ~ 17 V wide voltage) |
Output voltage | DC 19 V ± 0.25 V |
Output Current | 8A |
Output | 152W |
No-load current | 35 mA |
ripple | 45 mA |
Efficiency | ≥93% |
IP Rating | IP67 waterproof (short immersion) |
Operating temperature | -20°C ~ 80°C |
Size: | 7.5 x 7.5 cm / 3 x 3 inches |
Weight | 251g (approx.) |
Package includes: | 1 x voltage converter |
To ensure the normal operation of the inverter within the input voltage range, the input voltage must not be below the minimum or maximum input value limited by the product during operation. The input voltage value must be more than 2V higher than the output voltage value if there is no 2V differential pressure. The output value becomes low, but the use of the converter is not affected (affected). The input current must be greater or equal to the power required by the output load device (e.g. If the power of the load unit requires 100 W, the input power must be greater than or equal to 100 W). When the converter is used, the current of the load device should not be greater than the maximum current value that the converter can withstand and leave the converter as much room as possible to ensure that the converter works normally and achieves the highest conversion efficiency. The positive and negative poles of the converter can be used during operation. will not be interchanged. . A reverse connector may damage the inverter. It is recommended to add a suitable fuse to the input during operation. The chip works in low load mode when there is no load and the output voltage may vary within a certain range. Note: Please be careful and connect the cables correctly, otherwise the module will be damaged.
|
|
|
---|---|---|
Function:It has automatic protection functions such as over current, over voltage, overheating, short circuit, etc. When the protected circuit reaches an unsafe value, the built-in protection automatically interrupts the circuit and resumes normal operation when the value returns to the normal range. |
Filter inductance capacitorMultiple electrolytic capacitors with ultra-low impedance. Sendust magnetic ring multi-wire inductance. Low heat. Large continuity current. |
Waterproof designIt is moulded with organic silica gel, which is waterproof, dustproof and shockproof and is suitable for use in various harsh environments. |