Single-core cables for cars, wiring, lighting, signal systems and electrical accessories, manufactured to the highest and most modern quality standards
Strands made of bare soft annealed copper ECu according to EN 60228, with a purity degree of 99.99%
For cable construction, single wires with a diameter of max. 0.245 mm are used. This makes the cables highly flexible and resistant to cable breakage.
Our cables with reduced wall thickness of the thermoplastic plastic jacket with a shore hardness of Sh90 are considered the most modern vehicle lines in the automotive and vehicle industry.
All Auprotec car cables have blank, soft annealed copper wires and a non-fading insulating cover made of PVC. They are silicone, cadmium and lead free and manufactured according to German industry standards and the highest and most modern quality standards.
|
|
|
---|---|---|
Set of 2Red, black |
Set of 5Red, black, yellow Brown, Blue |
Set of 8 optionallyBlack, green, red Brown, yellow, green yellow, Blue, red, white |
Thinner PVC insulation than conventional cables with consistent quality. High-quality workmanship. Intense and colourful insulation of the cables.
Cable cross section | 6.0 mm² |
Outer Diameter | Approx. 4.10 mm |
Single wire diameter | Approx. 0.349 mm |
Nominal voltage: | U~=50V U-=60V |
Temperature range | Class A -40°C to +85°C |
Material: | Bare soft annealed copper ECu |
insulation | Polyvinyl chloride (PVC) DIN 72551 / ISO 6722 |
Construction / classification | Fine-stranded conductors, class 5 according to EN 60228 |
Conductor resistance at 20 °C | 13.30 Ω/km |
Country of manufacture: | Germany |
Vehicle cable 1.50 mm² | Vehicle cable 2.50 mm² | Vehicle cable 4.0 mm² | Vehicle cable 6.0 mm² | |
---|---|---|---|---|
Cable cross section | 1.50 mm² | 2.50 mm² | 4.0 mm² | 6.0 mm² |
Outer diameter, incl. Jacket: | Approx. 2.20 mm | Approx. 2.80 mm | Approx. 3.25 mm | Approx. 4.10 mm |
insulation | Polyvinyl chloride (PVC), colour coded according to DIN 72551 | Polyvinyl chloride (PVC), colour coded according to DIN 72551 | Polyvinyl chloride (PVC), colour coded according to DIN 72551 | Polyvinyl chloride (PVC), colour coded according to DIN 72551 |
Material: | Bare soft annealed copper ECu | Bare soft annealed copper ECu | Bare soft annealed copper ECu | Bare soft annealed copper ECu |
99.99% purity | ✓ | ✓ | ✓ | ✓ |
Reduced wall thickness | ✓ | ✓ | ✓ | ✓ |
EN 60228 - quality product made in Germany | ✓ | ✓ | ✓ | ✓ |
Selection set 2 colours of 5 / 10 metres | ✓ | ✓ | ✓ | ✓ |
Selection set 5 colours of 5 / 10 metres | ✓ | ✓ | ✓ | ✓ |
Selection set 9 colours of 5 / 10 metres | ✓ |
_________________________________
The cross section is a surface dimension
The diameter is a length dimension
_________________________________
Calculation cross section A from diameter d: d² x / 4
Calculation diameter d from cross section A: 2 x √A / OPP (Pi) ≈ 3.14