Feature
●Linear polariser: the linear polarising film is an optical element that converts natural light into polarised light. Its degree of polarization is up to 99.99%. The linear polarising film can effectively reduce reflections, improve photo saturation and do not affect the definition of objects.
●Premium material: the polarising filter uses high-quality PET material. It is not easy to break and can be cut freely into a suitable shape and size.
●Wide application: the polarised film sheets can be easily applied to different surfaces such as screens, lenses, windows and dashboard displays. It is widely used for physical experiments and camera work. The polarising filter has an excellent shading ratio. It can adjust the angle of the filter paper to achieve the desired effect.
●Adhesive design: the self-adhesive polariser comes with a high-quality adhesive that is easy to attach and tear off your device. Tips: There is a protective film on both sides of the product. Please remove the protective film first and then attach the adhesive side to the device.
●【Product Specification】 Dimensions: 20 x 30 cm, thickness: 0.16 mm, packaging: 2 x self-adhesive polarising films.
Description
Selens Pack of 2 Polarising Film 20 x 30 cm Self-Adhesive Linear Polarising Filter for Screen, Camera and Physics Teaching
Performance description:
Size: 7.8 x 11.8 inches / 20 x 30 cm. Thickness: 0.16 mm
Package Content:
2 x Self Adhesive Polarizing Films
Please note:
To make it easier to identify which side is sticky, we have further improved the product by attaching a small label on the side that is not sticky.
- Our optical film is made of high-quality materials and selectively filters out unwanted light waves, allowing only the desired polarisation to pass through.
- Premium Polarized Film is the perfect solution for reducing glare and reflections in your electronics, automotive and photographic equipment.
- Polarising filters can be placed on a variety of surfaces, e.g. on dashboards, but not on surfaces with large curvatures, such as suitable for eyeglass lenses.
- With protective film and adhesive. You can either simply stick it to your device or use it directly without removing the protective film.
|
|
|
|
|
|---|---|---|---|
|
|
|
|
|
In order to facilitate the better adaptation of the polarising film to the object, the polarising film has been specially equipped with adhesive. This self-adhesive polarising film can stick firmly to objects without leaving marks when removed. The specific operating method is as follows:
1. Clean the surface: Before applying the polarising film, be sure to clean the surface of dust and dirt. You can gently wipe the surface with a soft cloth or clean cloth and make sure it is clean and dust-free.
2. Spray a small amount of distilled water: Use a spray bottle to lightly spray the surface with a small amount of distilled water. Be careful not to use too much water to avoid unnecessary moisture on the surface.
3. Apply the pile film: Confirm the sticky side (tear off a small protective film at the corners to confirm the stickiness, do not tear everything apart). Then place the adhesive side of the polarising film on the surface.
4. Remove all air bubbles: After applying the polarising film, use a flat and soft tool (e.g. a soft scraper to avoid scratches on the film) to gently press from the centre to the edges to eliminate possible air bubbles. Be careful when using the tool and avoid excessive pressure.
The polarising film rotates 360 degrees clockwise. Adjust it to the desired perspective effect, mark the position and cut it out and insert it. Note: Why turn? Each display film must rotate to match its position, and each screen angle has different effects.
