The component manufacturer Reverse Components originating from the Black Forest specialised in mountain bike attachments from day one, which should meet the extreme demands in the field of all mountain to extreme downhill in terms of performance, durability, compatibility and durability. Be part of the Reverse family!
Features:
With the angle spacer (fork cone) for 1 1/8 inch forks, the geometry of the bike can be modernized and finely tuned. It is possible to make the steering angle flatter by half a degree (-0.5°), which allows even more performance on steep and difficult descents from the bike. The spacer replaces the conventional fork cone and is mounted between fork crown and headset.
The angle spacer can be used on any headset with 45° ball bearings. (45° ball bearings are installed in 95% of all bikes) To use the angle spacer, simply remove the fork from the frame and then remove the existing fork cone/crown race from the fork crown. The angle spacer is mounted/opened directly above the fork crown in the place where the old fork cone / crown race was previously located. The use of the angle spacer does not change the stability and stiffness of the fork in any way. It can be safely mounted on any bike. This gives you a more modern geometry with more driving fun and safety.
Installation height: 10 mm.
Material: aluminium.
Inner diameter: 1 1/8 inches.
Outer diameter: 51.0 mm.
Weight: 33.8 g (+/- 5% weight tolerance).