Specification:
Material: polyurethane, stainless steel.
Color:Gold,Black,Transparent
Inner diameter of bridge tube. 9mm
Bridge tube length: 64 cm.
Outer diameter of bridge tube. : 10mm
Filling hose thread size: 1/4 NPT
Diameter of the filler hose. : 8mm
Filling tube length: 66.7 cm.
Screw diameter filling hose. 26mm
Filling hose with screw outer diameter. : 12mm
Fitment:
Fits Seastar Inboard Outboard Hydraulic Steering Systems For refilling the steering of your boat.
Basic instructions:
1. Attach to helmet reservoir (do not pierce (do not run empty).
2. Connect the bridge pipe to the fittings on the steering cylinder and loosen the fittings.
3. Use the helmet to pump through the system by turning the wheel towards it. Air bubbles are pushed to the reservoir at the rudder.
4. Manually pivot outward through full articulation to relieve trapped air.
5. Note: If you point the fittings upwards when pumping with the helmet, air may escape.
6. Repeat 3-4 times necessary until no air is visible in the bridge tube.
7. Pull the fittings before removing the bridge pipe.
Package includes:
1 x Bridge Tube
1 x filling hose with screw