Description:
This whetstone made of corundum has a high hardness, toughness and good stability. Suitable for grinding metal materials with medium and high tensile strength.
It is widely used for coarse grinding of ordinary steel such as low hardness carbon steel, general alloy steel, malleable iron, hard bronze, cutting tools, workpieces, etc. Also for shaping sanding.
Can be installed on power tools such as grinders, deburring sanders, flat grinding, save time.
Available in 2 shapes and multiple sizes. Normal quality grinding head, the size may shrink, please choose according to actual needs.
Tips:
The new corundum grinding head should be tried at low speed before use. If there is a jumping problem, do not use it anymore.
Please press gently and avoid shock. The corundum sander is used for sanding workpieces. If there is too much force, the sanding powder is difficult to remove.
During use, flying chips may occur. When using this corundum grinder, please use a device, a non-slip finger rest and wear protective goggles.
Specifications:
Material: brown corundum (aluminium oxide)
Shape: Cylindrical
Granularity: 80 grit
Shaft Finish: Nickel Plated
Shaft material: carbon steel
Shaft diameter: 6mm/1/4"
Head diameter: 25mm/1 inch
Total length: 50 mm/1.97 inch
Required line speed: higher than 10-20 m/s.
Package: 10 pieces with mounted grinding tips stone heads