Note:Please refer to the picture and select the correct bearing type before placing your order (sealed or shielded on both or one side of the warehouse) Suffixes on the bearing only to distinguish between sealed and shielded bearing types. This would not affect the use of our product.
Description:
Single row, pre-lubricated, normal accuracy.
Deep groove ball bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
Ball bearings are cost-effective and low maintenance with low friction and high limit speed.
Chrome steel (GCr15) made with heat treatment, provides high and uniform hardness, good wear resistance
Suitable for all kinds of industrial equipment, micro motors, small rotary motors, office equipment and so on.
Selection guide:
shields
(designation additive Z/ZZ) - High speed. Protect from dirt and debris.
Sealed
(RS/2RS) - Made of sheet steel reinforced nitrile rubber (oil and liquid resistant). Lower limit speed as shield bearing.
Specification:
Model: MF85ZZ
Shielded Type: Double Shielded
Inner barrel/outer barrel material: chrome steel (GCr15).
Cage material: stamped steel
Inner diameter (d): 5 mm.
Outer diameter (D): 8 mm.
Thickness (B): 2.5 mm.
Flange Diameter: 9.2mm
Flange thickness: 0.6 mm.
Dynamic load rating (Cr): 185N.
Static load rating (Cor): 72N
Accuracy class: P0 (ABEC1).
Noise level: Z1.
Number of pack: 10 pieces