The connection under the motorcycle carburettor is for the oil pipe. There are two interfaces on the carburetor of the motorcycle engine, the upper is cast in one piece with the carburettor. It is also an air balance pipe, a tube that keeps the internal pressure of the carburettor balanced with the external atmospheric pressure. The next copper pipe connection is the fuel line that represents the channel to feed the fuel in the fuel tank into the carburettor.
Description 1:
Product: Carburettor intake manifold. Colour: black. Material: 100% brand new material made of rubberWeight: 222 g. Quantity: 4
Size:
Total length: 36.50 mm. Inner diameter: 31.50 mm. Outer diameter: 36.20 mm
Many scooters come with a throttled intake manifold from the factory. The replacement by an open or unthrottled one brings slightly better acceleration and a slightly increased final speed. However, it is mandatory to replace the intake manifold when installing a larger carburettor.
|
|
|
|
---|---|---|---|
New MaterialOur factory is made of 100% brand new materials and performs tests and inspections before leaving the factory, so that you can use our products safely. |
Compatibility:Yamaha Virago XV250 1988-2010Yamaha Virago XV125 1990-2010 As long as your model meets the requirements of the model for which our products are suitable, you can be sure to place an order! |
Install correctlyThe carburettor interface of the motorcycle must be tightened during installation. This is very important as when the carburettor interface is loose, the driving speed of the motorcycle is reduced and oil leaks in severe cases. |
Clean up on timeThe interface must be cleaned frequently. This is also a point that everyone easily overlooks. The device brings impurities into the carburettor interface during operation. Granulate stains can also cause a clogging of the oil line, which affects the operation of the motorcycle. Even causes its damage. |