The connection process is as follows:
1. First clamp the red cable of the start cable to the positive pole of the red battery of the "rescued".
2. Then clamp the red cable at the other end to the positive pole of the red battery of the "rescue vehicle".
3. Clamp the black cable to the black negative battery of the "rescued".
4) Then clamp the black cable to the black negative battery of the "rescue vehicle".
First start the engine of the "rescue vehicle" and then the engine of the "rescue vehicle". If you find that the "rescue vehicle" still cannot start, please check if the metal contact part has poor contact.
After starting the engine, you still need to remove the start cable in the correct order, otherwise it may cause a short circuit.
The procedure for removing the line is as follows:
1. First remove the black cable of the "emergency" vehicle.
2. Remove the black cable of the "rescue vehicle".
3. Then remove the red cable of the "rescue vehicle".
4) Finally, remove the red cable of the "rescued" vehicle.
Instructions:
The battery cable can be purchased in the car parts market. The battery cables are usually black and red, which are mainly used to distinguish between the positive and the negative electrode. It is not necessary to start the vehicle with electricity while driving. All you need to do is connect the batteries of the two vehicles in parallel. The red cable is connected to the positive electrode of the battery of the two cars, the black cable to the negative electrode of the battery of the two cars, and then you are ready to go. The vehicle is off.
💗💗 Package:
2 x fuse wires (black and red)