Feature

●[Part Numbers] Part Number: LR024296 With cap and sensor. Number of Pins: 2
●[Features] for Land Rover LR2 Base, HSE, HSE 2.0L L4 - Gas 2013-2015, Land Rover Range Rover Evoque Dynamic, Prestige, Pure 2.0L L4 - Gas 2012-2014, Land Rover Range Rover Evoque Autobiography, Autobiography, Dynamic, Prestige, Pure 2.0 L L4 - Gas 2015 for Land Rover Range Rover Evoque Autobiography, HSE, HSE Dynamic, SE, SE Premium 2.0L L4 - Gas 2016, for Land Rover Range Rover Evoque Autobiography, HSE, HSE Dynamic, SE, SE Dynamic, SE Premium 2.0L L4 - Gas 2017
●[Function] Replace the coolant cooler tank to keep your engine at the right temperature under different conditions and fix the problem of engine stop due to engine overheating.
●[Installation instructions] Turn off the car and cool it, remove the screws and container, let the remaining coolant flow back into the drain tray, replace the new container tank and replace the coolant hose back into the cooler and tighten the clamp, finally check if the function works well.
●Durable material: The use of durable material and plastic construction aims to extend the service life, rust protection, oxidation protection, liquid loss and anti-deformation and do not fall off after prolonged use.


Description

aopro2209140877_ap_a01aopro2209140877_ap_a01

Merkmal:

  • Der Kühlmittelbehälter ist mit Schläuchen am Kühler und am Motor befestigt und ein wichtiger Bestandteil des Kühlsystems, der die überschüssige Kühlflüssigkeit zur Kühlung des Motors aufnimmt.< br>
  • Wenn ein Kühlmittel-Ausgleichsbehälter Probleme hat, kann dies zu folgenden Problemen führen: Konstant niedriger Kühlmittelstand, Kühlmittellecks, Überhitzung des Motors.
  • Dies ist ein Nicht-OEM-Produkt, nur Zubehör!

Spezifikation:

  • Typ: Kühlwasserbehälter
  • Teilenummer: LR024296
  • Material: Kunststoff
  • Farbe : Schwarz, transparent
  • Position: Vorne
  • Sensor beinhaltet: Ja
  • Anzahl der Stifte: 2
  • Durchmesser des Kühlereinlassschlauchs: 39 mm / 1,54"
  • Durchmesser Kühlerauslassschlauch: 16 mm / 0,63"
  • Größe: 27 x 14 x 16 cm / 10,63" x 5,51" x 6,30" (L*B*H)

Ausstattung:

  • für Land Rover LR2 Base, HSE, HSE 2.0L L4 - Gas 2013-2015
  • für Land Rover Range Rover Evoque Dynamic, Prestige, Pure 2.0L L4 - Gas 2012-2014
  • für Land Ro ver Range Rover Evoque Autobiography, Autobiography Dynamic, Dynamic, Prestige, Pure 2.0L L4 - Gas 2015

Ersetzen:

  1. Stellen Sie Ihr Auto ab und lassen Sie Ihren Motor laufen vollständig abkühlen lassen.
  2. Schrauben und Behälter entfernen.
  3. Schlauch vor dem Abziehen mit einem Lappen umwickeln und restliches Kühlmittel in die Auffangwanne zurücklaufen lassen.
  4. Nehmen Sie den beschädigten Behälter heraus und lassen Sie das Kühlmittel ab.
  5. Den Kühlmittelschlauch wieder am Kühler anbringen und die Schelle festziehen.

Lieferumfang:

1 x Kühlwasserbehälter

1 x Deckel

1 x Sensor

Product information