Feature
●Motorcycle wheel balancing device - The overall colour is black with a silver centre cone. The overall size is 40 x 22 x 51 cm, the centre cone is 12 mm diameter and the length is 400 mm. Suitable for virtually all family car tyres on the market.
●Material - The entire scale frame is made of high quality iron and finished with a rich black powder coating to prevent rust and corrosion and increase the service life. The counterweight of the centre cone is made of galvanised iron, which is hard enough to ensure the load capacity.
●Adjustable - The centre cone is adjustable to accommodate a variety of tyre types and ensure the safety of all tyres during use. The distance is adjustable and can be used in different ways. Tyres with a diameter of up to 80 cm and a width of no more than 32.5 cm can be used without hesitation.
●Stability - For stability, we have equipped the bottom of the scale frame with a spirit level and also added 4 rounded corners to keep it stable. This allows for higher precision and prevents the machine from becoming unstable and causing a danger.
●Applicable - This wheel balancing machine is the ideal helper for tensioning, balancing or trimming wheels. It is compatible with most motorcycle and sports bike types and thanks to its convenience and easy operation, it is ideal for home use, garage or workshop.
Description
Motorcycle Wheel Balancing Device with Adjustable Tapers Tyre Balancer Black
This extremely lightweight and portable wheel balancer is suitable for a wide range of different wheels. Thanks to the practical design, the feet of the stand can be manually adjusted to bring it to a perfectly parallel position.
- Extremely easy to install
- Non-slip foot bar
- Align the holes
- Buttons in
- Ready to install
Instructions for troubleshooting in the level indicator
The "water drop" of the spirit level is not in the middle of the circle, you can easily rotate the 4 feet, you have to turn the lower foot slightly again and again to reach the "water drop" in the middle of the circle, the middle of the circle means that it is in balance.
Data:
Color: Black
Material: Iron and galvanised iron
Coating: Black powder-coated
Dimensions of the scale frame: 40,5x21x50cm
Size of the centring cone: φ 12 x 400 mm
Uses: Max. Diameter 80 cm, width 32.5 cm wheel
Delivery
1 x balancing device, 4 x feet
1 x cone – 1 x accessory set
Installation method:
First, check whether all accessories are complete, and then start installation. Screw the 4 mounting feet through the pre-drilled holes. Then the two posts are attached to each side. The attachment of the centring cone to the top of the column. Placement of the connected centring cone. Finish. (The width of the centring cone can be adjusted by yourself)
|
|
|
|
|
|---|---|---|---|
Centering coneAdjustable width for different tyre sizes. |
Support feetNon-slip to ensure overall stability. |
levelerProvides balance and greater precision during use. |
Made of ironFinished with black powder coating to ensure a long service life. |
