[black]
Impact absorbing industrial rubber for maximum protection
A tight garage where you open the car door too violently and the car paint has a scratch. We all know that. The Leocraft garage wall protector made of high-density foam works effectively against scrapes and paint damage to your car. Shock on the garage wall is softly cushioned by the door protector. The garage wall protector also catches swinging door openings, so that a break into the garage wall is prevented.
Self-adhesive wall protection can be individually cut to size
No garages and no vehicle parking space is the same. We attach great importance to the fact that our products are easy to use and meet the individual needs of our customers. The Leocraft door protection strips have a self-adhesive backing that allows easy installation without drilling. Whether wooden carport or plastered garage wall: the ultra-strong adhesive sticks to almost all surface structures.
Reliable protection against paint damage and scratches
Shock-absorbing, scratch-resistant and abrasion-resistant
Can be individually cut to size
Easy to clean, water and dirt-repellent
Durable, sealed surface
The front of the wall protector is decorated with an elegant diamond structure. Thus, the door protection strips protect against scrapes in the paint and at the same time offer a visual highlight in your garage.
|
|
|
|
---|---|---|---|
Sticks to almost all surfacesThe stop protection can be attached to almost all solid surfaces such as plaster, concrete, wood or metal. The strong adhesive ensures a permanent bond between wall protection and wall. |
Potential stop pointsPark your car in the usual place in the garage. Carefully open each door one by one and mark the place where the car door would touch the garage wall. |
Surface preparation:Clean the surface to be glued so that it is free from dust, dirt and oil. Before sticking, the surface must be completely dry again. |
Attaching the wall protectorTo stick, peel off the masking film evenly and apply the self-adhesive garage wall protector with even pressure. |
The Leocraft garage wall protector is characterised by a special formula in the material composition. This ensures that impacts are reliably absorbed and absorbed without threatening the car door scratching or other damage.
The LEOCRAFT garage wall protection panels are particularly thick and shockproof, while our garage wall protection wheels are characterised especially when corners or pillars are to be provided with protection.
A set of this garage wall protector is designed to protect all four doors of a car from scratches and damage. Depending on the width and size of your driveway, garage or carport, it may be useful to also provide the ceiling and back panel with our door protector, so that bumpers and boot lids are protected from possible damage.
Leocraft stands for durable and high-quality products. Our well thought-out protectors consist of several layers and thus ensure an optimal hold, protection against scratches and paint damage. The thick protective layer leaves scratches no chance and protects against damage.
The extra strong adhesive ensures a high initial adhesive strength and a long-lasting bond with the surface. Our white masking film is particularly tear-resistant - for frustration-free and easy installation without drilling
If you have chosen the right protection from LEOCRAFT, the choice is still the right colour.
The grey colour version is relatively inconspicuous and fits very well in the picture if the garage wall is made of concrete.
If you have chosen the right protection from LEOCRAFT, the choice is still the right colour.
The black colour version is our most successful variant. After all, it is naturally visually less susceptible than other colour variations.
If you have chosen the right protection from LEOCRAFT, the choice is still the right colour.
The colour version white is always a good choice. Especially if the vehicle is white or the wall is very bright.
Grey
Black
White
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|---|
[4x] 40x20x2cm black | [2x] 200 x 20 x 0.75 cm black | [4x] 40x20x2cm Grey | [2x] 200 x 20 x 0.75 cm grey | [4x] 40 x 20 x 2 cm white | [2x] 200 x 20 x 0.75 cm white | |
Shape: | 40 x 20 cm panels | Rolls of 2 m x 20 cm | 40 x 20 cm panels | Rolls of 2 m x 20 cm | 40 x 20 cm panels | Rolls of 2 m x 20 cm |
Contents: | 4 panels | 2 rolls | 4 panels | 2 rolls | 4 panels | 2 rolls |
Thickness: | 20 mm | 7.5 mm | 20 mm | 7.5 mm | 20 mm | 7.5 mm |
Colour: | Black | Black | Grey | Grey | White | White |
Self-adhesive | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Water-repellent | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Sealed textured surface | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Shock absorption | Very strong | Strong | Very strong | Strong | Very strong | Strong |
Advantages: | Extra thick for maximum protection | Very flexible for corners and pillars | Extra thick for maximum protection | Very flexible for corners and pillars | Extra thick for maximum protection | Very flexible for corners and pillars |