This bonnet switch set is universally applicable to keep 12 V consumers (e.g. marten repellent devices) switched on in the car when the bonnet is closed, but switched off when the bonnet is opened. However, the application/assembly requires certain manual skills, as the switch may need to be adjusted/modified/configured depending on the vehicle model. Also included in this kit are self-tapping Phillips self-tapping screws in two lengths + U-disc to attach the switch to the vehicle panel. Depending on the vehicle model, the switch can be adapted / modified then often also optionally used for use on the tailgate / boot. ++++++ Tip for installation: please install the switch so that the pin when the bonnet is closed for approx. 60 - 80 %. Then the connected marten scarecrow switches on. The pin must not be pushed in to the stop, because then the switch can be defective if the bonnet is slammed vigorously (the pin then strikes against the stop pushes out the switch bottom). ++++++++++++++ Package contents/box contents: 1 x bonnet switch (1 x ON) | 1 x stainless steel mounting bracket | 2 flat couplings 4.8 mm | 1 x self-tapping drill mounting screw 4.8 x 16 mm | 1 x self-tapping drilling mounting screw 4.8 x 19 mm | 1 x galvanised U-disc +++++++ Item no. Z004-Set / Z 004-Set | EAN 0737356140516
Offered is: Accessory set KEMO Z004 set including mounting material (self-tapping screws and U-washer) (EAN 0737356140516)