Feature

●Material: thickened rust-proof box, no deformation and not easy to rust. The pump body made of aluminium is antioxidant, does not deform after prolonged use, strengthens the sealing performance and is safe for pressure measurement. High compression hose, antioxidant, soft and not easy to crack.
●Precise tick count: With the dual valve system, reliable and accurate measurement results are achieved. Independent check valve with high copper content for tightness and improved accuracy. Leak pressure test pump 0-25 bar pressure, indicated in psi/mpa units, 13ml flow.
●Labor Saving & Strong Airtightness Extended anti rubber handle, no slipping under pressure, comfortable and labor saving grip. The high pressure hose is 1 metre long. The pump is equipped with a long high pressure hose, which can be used directly for the connection between the pump and the hose. The connection is 1/2 thread. The connection is sealed and has strong air tightness to prevent impurities from entering the pump and filter.
●Applicable water pressure range: normal tap water pressure of 0.3MPa, residential high-rise 0.4MPa, water pipe pressure generally under pressure to 0.8MPa-1.0MPa. (Tap water 0.1 MPa 1 kg pressure)
●Widely used: test pump for pressure testing of water pipes, heating and oil systems, air conditioning and solar power system. Suitable for chemicals, construction, plumbing, petroleum, coal, melting, shipbuilding and other industries. Can be used in heating, refrigeration systems as well as water or oil-carrying pipelines.


Description

Product description:
The filling is done via a manual hydraulic test pump. It can be used to detect leak tests, such as E.g.: heating pipes, pressure vessels, fire hoses, irrigation systems, heating systems, solar systems, etc.


Features:
The pump body is made of copper + aluminium joint + brass check valve.

Box contents:
1 x test pump.
1 x hose.
1 x set of O-rings.
1 x pressure gauge.
1 set x accessories.

Instructions:
1. Connect the water hose to the water pipe.
on 2nd Close the switch when the pipe is filled with water and the air escapes.
3. Fill the tank with water and tilt the plate up and down. 4. When the pressure gauge values rise to the required pressure, you can stop the pressure.
5. If the pressure gauge does not fall on the pressure gauge after stopping the pressure, this can prove that the pipe pressure performance is good, on the contrary, that the measured pipe sealing performance is not good.