Feature(may vary by option.)
●Self-priming soft connection system, powerful automatic pressure pump, extremely efficient, very low current consumption and high output power. Stable features and high reliability, this is a perfect choice if you need a self-priming water pump!
●When the water outlet of the pump is completely blocked, the power supply is automatically interrupted and the pump motor stops. When the water outlet is open, the pump will start again.
●Self-priming water pump. Built-in pressure switch that automatically turns on and off when the tap is turned on and off. Widely used in RVs, car washing, garden irrigation, spraying for agricultural chemicals, house cleaning, boat, caravan, etc.
●120 W, strong power, the maximum stroke is lift: 130 m.
●The theoretical value of the pump flow can reach 10L/m.
[24v & 5a]
Description
Specifications:
Voltage: 12V/10A; 24V/5A (optional)
Maximum power: 120 W.
Maximum pressure: 13 kg.
Working pressure: 8G.
Opening flow: 10 l/m.
Vertical extraction: 1.5m
Lift: 130 m.
Package list:
1 x pump.
1 x filter net.
1 x handle of the pump.
3 x mounting screws.
1 x replacement fuse.
Note:
Actual product colour may vary from the photo due to lighting conditions.
There may be slight deviations in the measurement of the product.
Instruction manual:
1. Connect the pump to the inlet and outlet lines. It must be ensured that the connection between the inlet and outlet pipes and the pump is tight, otherwise this may lead to low pressure or water leakage. (Note: There are arrows on the pump lid indicating the direction of the water coming in and out, and the arrow direction is the direction of the water discharge.)
2. Install the filter at the inlet end, and the filter density is preferably over 80 mesh. (i.e. 80 holes per square centimetre).
3. Connect the micro diaphragm pump to the motor. The electrical parameters of the connected power supply must meet the input requirements of the motor.
4. Turn on the power supply and the motor pump starts to run.
5. The water is drained for 5 to 10 seconds. Drain the air in the pump and pipeline. After the water is stable, temporarily turn off the power supply and connect the water gun or pump head.