Feature

●JST Plug: One of the lines of the self-priming 370 motor pump is a JST plug, which can be powered directly (5V-7.4V) and plugged directly into the T-piece of the receiver.
●Cooling function: the RC water pump is used to regulate the water cooling of the ship model motor. Pull the water into the cabin and connect the copper water cooling ring to cool the engine.
●Maximum power conversion: RC water cooling pump with low noise design and high efficiency, water cooling pump can achieve maximum power conversion, is a good RC accessory.
●Long service life: under 5 V voltage, the 370 RC water pump can still work normally after 15 hours of operation without interruption.
●FOR RC BOOT: The motor water pump is used on the remote control boat for water cooling, and the RC water cooling pump is suitable for the calibre 15mm, 26mm, 40mm.


Description

Specification:
Item Type:RC Water Pump
Material: plastic, iron.
Weight: approx. 62 g / 2.19 oz.
Total length of pump: 73 mm/2.87 inches.
Engine outer diameter: 24 mm/0.94 inches.
Pump head outer diameter: 27 mm/1.06 inches.
JST wire length: 10 cm.
Receiver cable length: 30 cm/11.81 inches.
Operating voltage: 5V-7.4V.
Used size of water pipe: water outlet diameter 4.2 can be equipped with water pipe, inner diameter of 3-4 mm.
Applicable to: caliber 15mm, 26mm, 40mm >1. Please allow 1-3 mm error due to manual measurement. Thank you!
2. The calibration of the display is not consistent and the colour of the item shown in the photo may differ slightly from the actual object.