Sanigo SANI-P420i is an efficient lifting system pump with a 400W motor that removes waste water from the plumbing and directs it into the main pipe. It is equipped with 3 inlets that can be connected to multiple sanitary facilities such as toilet, shower, bathtub, sink and more.
It has a pump distance of up to 8 m vertically and 80 m horizontally, with a max. Flow rate of 145 l/min. The noise level is very quiet at 30-50 dB and safe for home use. It also features a carbon filter to minimise strong odours and a removable repair plate that is accessible when troubleshooting.
Its powerful motor pump allows you to install showers, a sink or a bathtub in the basement, attic or any other room, even below the backflow level. This product also comes with a 2 year warranty.
The discharge head of the waste water is up to 8 m and the distance up to 80 m, but the total delivery capacity of the lifting system is composed of the ratio of the two values. In this case, 1 m in the vertical corresponds to 10 m in the horizontal.
When you install the pump, please use this as a reference for the pump spacing:
Vertical drain at 0 m = horizontal drain at 80 m.
Vertical drain at 1 m = horizontal drain at 70 m.
Vertical drain at 2 m = horizontal drain at 60 m.
Vertical drain at 3 m = horizontal drain at 50 m.
Vertical drain at 4 m = horizontal drain at 40 m.
Vertical drain at 5 m = horizontal drain at 30 m.
Vertical drain at 6 m = horizontal drain at 20 m.
Vertical drain at 7 m = horizontal drain at 10 m.
Vertical drain at 8 m = horizontal drain at 0 m.
Working water temperature: 90°C.
Motor winding material: copper windings
Outlet size: 23/28/32/44 mm.
Certificate: GS TÜV and CE certificate