Feature

●24V-50V DC supply, 8 levels adjustable output current 1.0A-5.6A. Bipolar Constant Current PWM Driver Output
●Fit for stepper motor 42/57 and widely used in automatic packaging machines, engraving machines and other automation equipment.
●Strong anti-interference ability, high precision positioning in complicated environments.
●Zero vibration at low speed, low noise and stable performance.
●Optical isolation input signal, pulse response frequency up to 200 kHz.


Description

11

11
Brand introduction:

The FTVOGUE brand is convinced to offer you high-quality and cost-effective industrial household products so you can buy them with confidence and use them more comfortably.

DM556 Unit Features:

Supply voltage up to 48 VDC. Maximum output current up to 5.6 AOoptical insulation, the input can be a common cathode, a common anode, a difference signal, a pulse response frequency of 200 kHz. Low speed, no vibrations and little noise. devicdevicdevice. ability, can achieve high-precision positioning in the harsh environment of the mains

  • Application: 42/57 stepper motor stepper motor
  • Input voltage: DC 20-50 V
  • Output current: 1.0-5.6 A, 8 levels adjustable, resolution 0.5 A
  • Drive method: Bipolar constant current PWM drive
  • Pulse response frequency: 200 kHz (max.)
  • Insulation resistance: > 500 MΩ
  • Insulation resistance: 500 V/min.
  • Dimensions: 118 x 75.5 x 34 mm / 4.6 x 3.0 x 1.3 inches
11

Driving function description:

Signal interface

PUL+ and PUL- are the positive and negative ends of the control pulse signal; DIR + and DIR- are the positive and negative ends of the direction signal; ENA+ and ENA- are the positive and negative ends of the release signal. 24V requires a range of 2K resistors

Motor interface

A+ and A- are connected to the positive and negative ends of the winding of the phase A of the stepper motor; B+ and B- are connected to the positive and negative ends of the winding of the phase B of the stepper motor. When replacing the windings of phases A and B, the direction of rotation of the motor can be reversed.

11

Driving function description:

Plug

Use a DC power supply, the recommended operating voltage range is 20-50V DC, the power supply is more than 100W, depending on actual use, the input does not exceed 40V DC is a suitable option

Indicator light

The device has two red and green indicator lights. The green light is the power indicator, the green light always lights up when the inverter is on; red light is the error indicator, if there is a surge or over current error, the error light is always on. Once the error is fixed, the red light goes out. If the drive fails, simply turn it on again and activate it to fix the error.

11

Installation instructions:

The external dimensions of the device are: 118 × 75.5 × 34 mm and the distance of the installation holes is 112 mm. Both horizontal and vertical installation is possible, with vertical installation recommended. When installing, it should be near the metal housing to facilitate heat dissipation.