Feature

●ESC has been specially designed and designed for industrial control of power tools such as air pumps, water pumps, oil pumps, fans, etc.
●Use three-phase brushless DC motors. The default setting is medium timing and long-term high current operation. The Jianyijia fan cooling has overheating protection.
●Due to the poor external heat dissipation conditions of the controller, the power is automatically reduced when the temperature exceeds 100 degrees, and the temperature returns to normal when it drops to 100 degrees.
●Max Speed: 224,000 RPM (2 Pin Motor), 74,000 RPM (6 Pin Motor), 40,000 RPM (12 Pin Motor), 35,000 RPM (14 Pin Motor)

Description

The power is automatically reduced when the temperature exceeds 100 degrees, and the temperature returns to normal when it drops to 100 degrees.
Max Speed: 224,000 RPM (2 Pin Motor), 74,000 RPM (6 Pin Motor), 40,000 RPM (12 Pin Motor), 35,000 RPM (14 Pin Motor)
Specifications:
Product Name: Potentiometer Three Phase DC Brushless and Hallless Drive
Model: X30A (potentiometer).
Working Voltage: 7-24V
Drive current: rated current 15 A plus fan cooling 20 A.
Max Speed: 224,000 RPM (2 Pin Motor), 74,000 RPM (6 Pin Motor), 40,000 RPM (12 Pin Motor), 35,000 RPM (14 Pin Motor)
Product size: length 45 mm * width 26 mm * height 12 mm (without wires and protruding capacitors)
Precautions:
1. There is no fuse in the power supply circuit on the motherboard. Jianyi added it himself. Reverse connection of the positive and negative poles of the power supply will cause permanent damage to some chips on the board (even if it does not work for 1 second).
2. In normal operation, there is a motor blocking protection. Since the power and current of the module are large, please do not close the module artificially if it does not work normally. Once the short circuit may cause the line to burn out and the tube burst, please use the small line for the first wiring test. Current Ederspannungstest, after OK, then forward high current and high voltage to work.
3. Do not connect a motor that obviously does not match the voltage, current or power of the drive module to avoid inexplicable "nonsensic" damage.
Package information:
Package size: 8 x 5 x 3 cm
Package weight: 28 g.
Package list:
1 x DC 7-24V 200W BLDC 3-phase brushless motor driver