Feature

●L298N as main chip, low heat, excellent anti-interference performance.
●High working power up to 46V, large current can reach 3A MAX and continuous current is 2A, power up to 25W.
●Can drive a 2-phase stepper motor, a 4-phase stepper motor or two DC motors.
●Built-in 78M05, draws power from the drive power. However, if the drive power is above 12V, please use the external 5V power supply as a power supply.
●Large capacity filter capacity, post-flow protection diode, more stable and reliable.


Description

Specification:
Chip: L298N.
Logic voltage: 5 V.
Logic current: 0 mA-36 mA.
Storage temperature: -20 °C to +135 °C.
Operating mode: H-bridge driver (dual).
Drive voltage: 5V-35V.
Drive current: 2A (MAX single bridge).
Maximum power: 25 W.
Dimensions: 43 x 43 x 27 mm.

Note:
This module has a built-in 5V power supply. If the drive voltage is 7V to 35V, this power supply is suitable for power supply. Do not enter voltage to the +5V supply interface, but a 5V output is available for external use.
When ENA IN1 is activated, IN2 controls OUT1 OUT2
When ENB is enabled, IN3 IN4 controls OUT3 OUT4

Package includes:
2 x L298N module.