Feature

●This power supply comes with a warranty covering DC 12 – 60 V low voltage permanent magnet brushed DC motor
●Operating voltage: Wide voltage (DC) DC12 DC60 V (65 V)
●Rated Current: 10 A, overload protection, short circuit protection current 12 A (over current, output, Power Surge indicator flashes the potential, the light is cut, Power Surge lift)
●Soft start function. Help prevent excessive current caused by the motor and makes damage (standard 0 second adjustable soft start), 0 – 5 seconds.
●Power control: Power 12 V120 W – 24 V240 W, 36 V360 W, 48 V480 W 60 V600 W


Description

Parameters (engine):
1 Working power supply: 12 – 48 Vdc
2nd speed: 3000 – 12000r/min
3. power: 400 W
4th torque: 500MN. M
5) insulation resistance: > 2Megohm
6) Dielectric Strength: 400 V
7) motor Length: 186 mm
8 diameter: 52 mm
9 Axis collet length: 48 mm
10 diameter of Axis collect holder: 16 mm
11 repeatability: 0.01 – 0.03 mm
12 ER11 collect: 3.175 mm
Description Controller:
1) This listing is for (DC 12 ~ 60 low voltage permanent magnet brush dc motor
2) Operating Voltage: Voltage Range (DC) DC12 V – DC60 (65 V)
3) rated current: 10 A, overload and short circuit protection current current 12 A (over current
Output, Power Surge indicator adjust the flash speed of the potential, the light is cut off, power surge lift)
4, Soft start function. A excessive power from the motor and damage.
Adjustable (default 0 seconds soft start), 0 – 5 seconds.
5) Power Control: 12 V120 W, 24 V240 W, 36 V360 W, 48 V480 W, 60 V600 W
6 Dimensions: Length 75 mm (3) x Width: 75 mm x Height: 42 mm
7 pulse width modulation range: 0% -100%
Control mode:
1 control (5 K – 100 K), presets 10 K potentiometer,
2 Mach3 – PWM speed control signal input, external PWM input requirements: level
3.5 – 12 V Vpp, Frequency 1 K – 10kHz, suitable for Mach3 spindle speed control.
Note: If there is a PWM signal Mode, you just need to pull pots, or it
An idea use PWM mode
Box Contents:
1 x 0.4 kW spindle motor
1 x PWM Controller
1 x Holder