Feature
●Parameters: stroke length is about 30 mm ~ 150 mm (150 mm in default, the stroke length can be easily adjusted); no load speed range is about 30-160 rpm; thrust range is about 1.5 ~ 13 kg.
●775 DC motor: with copper wire coil and built-in cooling fan, durable for use, with higher efficiency, lower power consumption and greater safety.
●Easy to wire and install: there are two brush feet on the bottom of the motor, which is more convenient to complete different welding processes. At the same time, the wiring is more convenient.
●Two optional control types: only with speed controller / with remote control and speed controller.
●Package includes: 1 x reciprocating piston motor, 1 x stand kit, 1 x speed controller, 1 x remote control, 1 x big end connector and 1 x black suction cup.
Description
Package includes:
1 x stroke linear motor
1 x stand kit
1 x speed controller
1 x remote control
1 x big end connector
1 x suction cup adapter
2 x cables
How to protect your machine?
Please confirm that you have screwed all buttons before starting the machine. The piston shaped linear drive load does not exceed the rated load. The piston linear drive is not waterproof, please do not immerse directly in water. Apply the correct lubricating oil or grease to the moving parts and the interior of the transmission.
|
|
|
|
|---|---|---|
MaintenanceIf the transmission runs abnormally and makes a strong noise, open the gearbox and apply some lubricating oil or grease inside the gearbox, the friction will be reduced and the machine will work more smoothly. |
Installation precautions:This flat place must align the screws. Otherwise, the stroke may fall off when working. |
Three mounting holesThere are three mounting holes on the board of the motor. The size of the mounting hole is 8 mm. |
|
|
|
|
|---|---|---|
Chrome-plated telescopic rodHigh hardness, strong bending strength. Bearing with high wear resistance, durable. |
Cooling FanBuilt-in fan. Export heat effectively and quickly to achieve cooling effect. |
Powerful motor with higher thrustHigh tensile strength. Adjustable stroke length 1.18 - 6 inches, at the same tension, the larger the stroke, the smaller the thrust. |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 24V150mm120rpm | 24V80mm120rpm | 24V150mm120rpm | 3XLR Adapter | Suction cup adapter | Vac-U-Lock Adapter | |
| thrust | 1.5 - 18 kg | 3-18 kg | 1.5 - 18 kg | |||
| Stroke Length | 3-15 cm | 2-8 cm | 3-15 cm | |||
| Speed | 25 - 120 RPM | 25 - 120 rpm | 25 - 120 RPM | |||
| Stand Kit | ✓ | ✓ | ||||
| remote control | ✓ | ✓ | ✓ | |||
| End connector | large end connector | large end connector | Small end connector |