Feature(may vary by option.)
●Combi Drill & Tap: Thread Size: M6 x 1; Hex Shank Size: 1/4" Combined drill and tap set for drilling, tapping, deburring and countersinking holes. One-step operation saves many work steps and improves work efficiency.
●Wide applications: suitable for processing blind holes. Used for tapping aluminum, countersunk steel, stainless steel, bronze, hard plastics, etc. Recommended feed speed: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
●Features: Self-centering point, no assistant required for centering or centering. The quick-change hex shank can be used on power tools more easily and safely. A tapered end on the hex shank can prevent excessive tapping.
●COATING - Consists only of the base substrate without coatings, well suited for most general purpose thread cuts. High-speed steel tool has high hardness and toughness, wear resistance and heat resistance.
●Tips: use on drills, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. It is recommended to use machine taps with tap collets with overload protection.
[M10 x 1 | 5]
[M8 x 1 | 25]
[M4 x 0 | 7]
[M3 x 0 | 5]
[M5x0 | 8]
[M6 x 1]
Description
The torque caused by too high feed speed is too large, which can easily cause the tap to break. Taps tend to chip or break due to speed overload or non-vertical tapping. Micro taps (such as ) are mainly used in watches and clockworks and knock wood and soft metals with lower hardness.
Specifications:
Thread Size: M6 x 1
Hex Shank Size: 1/4"
Drilling length: 23 mm / 0.91 inches.
Total length: 57 mm / 2.24 inches.
Material: high-speed steel 4341.
Finish: Uncoated
Package Content:2pcs x Combination Drill Bit and Tap