![Boost Regulator](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
The output voltage of the converter can be adjusted on site the user as follows:
In [Normal Operation] mode, press the [+] or [-] button once. The converter immediately switches from mode [normal operation] to mode [setting the output voltage] and at the same time turns on the output. The voltage display range is displayed. The number is converted from the [current output voltage value] to the [currently set voltage value] and flashes continuously. The user can increase or decrease the [setting value of the output voltage] by pressing the [+] or [-] button as needed. Click the button to change 0.1V each time. Long press the button to quickly increase or decrease. The voltage adjustment range is automatically limited by the system according to the input voltage. If the range is exceeded, the button does not react. After you have set the required [output voltage setting value], press the button [OK] to confirm. Then the last [output voltage setting value] is stored. The last stored [output voltage setting value] is still displayed for 4 seconds. After 4 seconds, the number displayed in the display range of the output voltage changes from [Currently set voltage value] back to [Current output voltage value], and at the same time the mode [Output Voltage Setting] will leave and to mode [Normal working mode]. If when calling the mode [setting the output voltage], the button [OK] does not within 4 seconds after the last Press the button press the key[+]or [-], the converter automatically leaves the mode [setting the output voltage] mode. In fixed mode, the [output voltage setting value] set this time is invalid and will not be saved.