Feature

●Tomzz radio fascia panels allow you to replace the original factory radio with higher quality head units from popular brands
●Compatible with Toyota Aygo (1st generation up to 2014), colour: black, set contents: radio fascia, radio adapter cable, installation bay, important information: please check before purchase whether the adapter cable is necessary, it may also be a normal ISO connection in the vehicle, then only the radio panel is required
●Note on how to install the fascia: In order to ensure optimum hold of the fascia in the radio slot, the metal slot of the car radio (usually included with the radio) must be inserted into the panel. As many of the pre-cut tabs as possible should be bent so that the radio has a secure fit
●Secure hold, perfect fit, attractive design
●Colour: black, material: plastic, cut-out (+/-2 mm): 1-DIN – 183 x 51 mm


Description

This radio fascia / radio frame / mounting frame is compatible with

Toyota Aygo (1st generation up to 2014).

Colour: black.

Set contents: radio fascia, radio adapter cable, installation slot.

Important information: Please check before purchase whether the adapter cable is necessary, there may also be a normal ISO connection in the vehicle, then only the radio panel is required.

Note on installing the bezel:

To ensure optimum hold of the fascia in the radio slot, the metal slot of the car radio (usually included with the radio) must be inserted into the fascia. As many of the pre-punched tabs as possible should be bent around so that the radio has a secure fit.

Tomzz radio faceplates allow you to replace the original factory radio with higher quality head units from popular brands such as Alpine, Becker, Clarion, JVC, Kenwood, Sony, Pioneer or others. Factory radios usually have a shape adapted to the cockpit. Therefore, it is almost impossible to mount a standard ISO or double DIN radio in the vehicle bay. Using our radio faceplates, a new radio can be installed in your vehicle without much effort. The installation is simple and can be done in a short time. As a rule, other parts such as radio adapter cable, antenna adapter or CAN-Bus interface are required for the installation of a radio in addition to the radio fascia. To continue using the built-in steering wheel remote control, a steering wheel interface is recommended.