Feature(may vary by option.)
●Pressure regulator with water filter: improved pre-filter with precision water pressure gauge for real-time monitoring and adjustment of the water output pressure. The pre-filter itself is equipped with a 1 inch thread and comes with an additional adapter, which is available in sizes 1/2 inch or 3/4 inch; please check which size you need before purchasing. If you have any problems, please feel free to contact us.
●Reusable water filter: pre-filter can be used for a variety of household water devices. It can effectively filter out impurities, reduce limescale blockages and extend the life of the device, protect the entire domestic water system at the source. (No drinking water filter).
●Premium water filter: the filter is made of food-safe 304 stainless steel filter with a filtration accuracy of 40 microns, corrosion resistant, rust-proof. The interface is made of brass, durable and safe. Explosion-proof transparent filter housing made of aviation polymer material, anti-frost and anti-burst.
●Easy installation: quick plug filter element, easy to assemble, no professional instructions required. The water filter should be installed perpendicular to the pipeline, with the drain ball valve facing down. The direction of the arrow on the valve body indicates the direction of the water flow. The drain ball valve is closed after installation.
●Easy to clean: the filter screen should be cleaned in time if a certain amount of adhesion to the filter screen of the front filter has settled. Open the drain ball valve to empty.
[1 mit 3 & 4 Adapter]
Description
Specification:* Material: brass* Outlet flow: 3T/H* Pressure range: 1.5 16 kpa* Ambient temperature: 270℃* Inlet and outlet diameter: 1/2",3/4"Steps to clean the filter:1. Turn off the filter control valve.2. Use a wrench to open the filter cup clockwise.3. Remove the filter cup, O-ring and filter device.4. Take off the flat sealing disc, pull out the filter, and then clean the fasteners on the filter.5. After the filter screen is cleaned, place the filter sieve and the sealing flat seal orderly on the filter element. Be sure to snap the flat sealing disc into the groove of the filter element.6. Insert the filter element into the filter cup body, insert the O-ring, screw the filter cup body into the main body and tighten it counterclockwise with a wrench. 7. Before opening the filter control valve, make sure to close the drain valve.