Feature

●【Function】: voltage to PWM module, which can convert analog 0-5V/0-10V signal into digital PWM
●【Application】: PLC can be used for industrial switchboards or other signal interface circuits by adjusting the voltage to regulate the PWM duty cycle.
●【Proper Size】: Under the module size, easy to use in different places.
●【Easy Operation】: Embedded microcontroller technology. Easy to use, you can fine adjust the potentiometer.
●【Point Level Range】: Take the input level range of PWM signal by short circuiting.


Description

Product description:
Module working voltage: DC5V - 12V; (power requirements: greater than 100mA). PWM signal receiving frequency range: 1KHz ~ 3KHz.
4.5V to 10V peak to peak level, jumper inserted at 5V. Class level signal mainly for general industrial control card (such as MACH3 board), 5V CPU interface;
Conversion range: 0-5V / 0-10V voltage converted to 0% ~ 100% PWM.
Tolerance: 5%.
Size:33*33*16mm(L*W*H).
Interface description:
VCC: Power supply 5V - 12V.
GND: Power supply ground.
PWM: PWM output signal positive.
GND: the output signal negative terminal.
VIN: iutput voltage 0-5v/0-10V.
GND: iutput voltage ground.

Instructions:
When the frequency is changed, the corresponding relationship may be offset needs to be recalibrated.
By adjusting the iutput voltage to regulate the duty cycle.
Accuracy can be controlled by adjusting potentiometer.

Package includes:
2 x voltage to PWM modules.
1 x 26awg red and black cable (30 cm/11.81 inches)