Feature(may vary by option.)
●Good thermal efficiency, even heating, safe use and lifetime of life.
●Cable type: self-regulator heating cable
●>> This cable is suitable for the drinking water pipe for household, drain pipe frost in winter and other heating applications.
●>> The cable can regulate the output power according to the temperature itself, it does not overheat, so the temperature controller is not required.
●>> The cable is with high-quality PE jacket and inside has the PE composite insulation layer, better waterproof and good quality.
[20m 24 V | 25 W]
[30m 220 V | 25 W]
Description
1. 2 V 24 V 110 V 220 Volt Water Pipe Anti-Freeze Frost Protection Heating Cable for Roof Self-Regulating Electric Heating Wire
Technical data:
1. Working voltage: 1 2 V, 24 V DC, 110 V, 220 V AC.
2. Rated power: 15 W/m, 20 W/m, 25 W/m (at 10 C degrees).
3. Maximum temperature obstruction: 65 °C.
4. Maximum temperature: 135 °C.
5. Width x thickness: 1 2 V, 24 V, 110 V (8 mm x 3 mm); 220 V (10 mm x 3 mm).
6. MIN BEND radius: 15 mm.
7. Conductor: tin-plated copper wire.
8. Jacket: PE
9. Maximum length: 220V, 50m, 110V, 30m, 24V, 20m, 12V, 5m.
10. 110 V heating cable type only 50 m as 1 roll in stock. If you order a 100 m type of 110 V, you will receive a 2 x 50 m heating wire, thank you!
Structure:
1. Copper conductor
2. Conductive heating element
3. Within the additional insulation
4. PE outer cover.
Installation steps:
1) Close the end of the cable with a heat-shrinkable tube or other electrical insulation tape. Do not connect the two conductors together.
2) Connect the other end with cold wire or plug (to connect to the power supply).
3) Wrap the heating cable on water pipes or attach directly to pipes, both are fine. Place the entire cable on the pipes and attach it every 30 ~ 60 cm with thermal tape or aluminium tape (sold in my store).
4) Suggest to wrap a layer of rubber cover on the tube, improve the efficiency of the heating cable and save energy, can also protect the heating cables.
5) Connect or plug to 1 2V, 24V, 100~120V, 220~240V (according to your cable). The heat tracking system is complete.
Tips:
Maximum length: 50 metres (220 V);
Maximum circuit length ~ 30 meters (110V);
Maximum circuit length ~ 20 metres (24 V);
Maximum circuit length ~ 5 meters (12V).
Quantity: 1 m - 100 m, as you choose