Feature

●This is a 32x16 RGB LED Matrix Panel, it has 512 full-color RGB LEDs in all. Each LED can be independently addressed and controlled. It requires at least 13 digital GPIOs to control the LED matrix. The led matrix has 2 IDC connectors (DATA_IN, DATA_OUT) on the back, you can cascade multiple panels and make a huge screen together. BUT Arduino doesnt support this function, its speed is not enough to multiple panel.
●Whats more, it is a high brightness, long life, no pollution, pure color LED display module. It can be used both indoor and outdoor, safety and stability, the module can not be mutually extrusion deformation, also can be used normally in harsh environment.
●Note: This panel needs a 5V@2A power supply. And if you connect 4 or more screen, it needs a high performance controller, such as Mega 2560, Raspberry. etc.
●Product Wiki https://www.dfrobot.com/wiki/index.php/32x16_RGB_LED_Matrix_-_6mm_pitch_SKU:DFR0471

Description

SPECIFICATION

Operating voltage: DC 5 V.
Average power consumption: <500W/㎡
Maxim Power Consumption: <1000w/㎡.
Pixels: 32 x 16 = 512.
Level of viewing angle: ≧160°.
Control mode: synchronous control.
Drive mode: 1/8 scan rate
Repetition frequency: ≧60Hz.
White balance brightness: ≧1200cd/㎡.
Refresh frequency: ≧300Hz.
MTTF: ≧5000 hours.
Service life: 75000~100000 hours.
Pixel pitch: 6 mm.
Dimension: 192mm*96mm/7.56*3.78 inches
Thickness: 11 mm.

SHIPPING LIST

32 x 16 RGB LED matrix panel (6 mm pitch) x 1.
IDC to XH2.54 cable x1
1 x IDC to IDC cable.
1 x power supply cable