Feature
●The USB audio interface is protected from hum and interference. Even during remote transmission, you can record vocals or guitar bass with the recording software that allows you to create your favourite music
●High performance converters allow you to record and mix at up to 24 bit/48 kHz. The noise is lower and high-quality audio playback is achieved
●The Stage Audio Mixer is equipped with +48V phantom power. With extremely quiet design. Suitable for beginners and professional studio applications
●Compatible with almost all recording programs for Mac and Windows, it fits perfectly with ProTools/Reaper/Ableton and other DAW recording programs
●Audio interface that works with a USB power supply or an external 5V DC power supply
Description
1. MIC 1: Standard XLR female for microphones
2. GAIN 1: Adjust the gain for the microphone signal at MIC 1. The gain controls have an LED to confirm the signal level. Green indicates an input level of at least -20 dBFS (signal available), the ring then glows yellow at -6 dBFS to indicate that the signal is about to overdrive, and finally red at 0 dBFS (digital oversteering).
3. 48 V: Switch for phantom power of the microphone input - activates the 48V phantom power on the XLR socket.
4. LINE/INST 2 - 1/4 inch: TRS jack socket for connecting instruments (unbalanced) or line level (balanced).
5. GAIN 2: Sets the gain for the line/instrument signal on LINE/INST 2.
6. HI-Z: Instrument/line level switch for LINE/INST 2 - switches gain for instrument or line level signals. "HI-Z" lights up when instrument mode is selected.
7. Output: Main monitor output level control - adjusts the output level at the outputs on the back and the headphone output on the front.
8. USB LED: Lights up when the device is powered by the USB bus and is confirmed by the computer that it is connected and working properly.
9. Direct monitor: Selects the monitoring of input signals (mixed with the DAW output) directly from the inputs (ON) or via the DAW (OFF).
10. 1/4 inch: TRS Output Socket If your headphone has a 1/4" TRS jack, connect it directly; if it has a 3.5mm TRS "mini jack", use a TRS 1/4" to 3.5mm jack adapter. Note that headphones with 4 pin TRRS connectors are unlikely to work properly.
11. USB 2.0 port - Type-C connection: Connect the device to your laptop or computer via the included USB cable.
12. Line outputs: Left and right - 2 x 1/4" (6.35 mm) TRS jacks; +10 dBu output level (variable), electronically balanced. You can use either 1/4 inch TRS (balanced connection) or TS (unbalanced connection) jack plugs.
13. Power supply: Choose USB power supply or external DC 5V as local power source.
14. DC 5V: External power supply connection
|
|
|
|
|---|---|---|
Real-time monitoringThe audio interface activates direct monitoring of zero latency input signals when activated. You can listen directly from the preamp input, giving you a completely lag-free sound that allows you to listen and edit your recordings in real time. |
Compatible with most common recording software programsCubase / Logic Pro / Reaper / Ableton Live / ProTools / StudioOne / Audition / GarageBand / Audacity |
Professional audio qualitySONIC CUBE has been specially developed for musicians and creatives and allows you to capture every nuance and bring your music to life. With this powerful device, you can revolutionize your studio setup by seamlessly connecting your microphone and guitar to your computer. |
