Feature(may vary by option.)
●Overcharge protection, over-discharge protection, over-current protection
●Using a high quality (A-grade) MOSFETs protective integrated circuit ICs from the solution of Seiko from Japan
●Strong load capacity, constant discharge current, high voltage resistance, low internal resistance. The heat sink contributes significantly to cooling.
●The consumption of the entire device is less than 2.5 uA.
●PCB use high corrosion protection, high water resistance and high impedance ESD compliant coating.
[6s - 30a With Ntc]
[6s - 30a]
Description
Overview
- NTC temperature detection, charging over 50 degree protection shutdown, discharge over temperature 70 degree protection shutdown.
- Lithium battery protection boards, car quality MOSFET applications are super impact resistant! Comes with 22AWG 30cm pure copper cable!
- The main functions are: overcharge protection, over-discharge protection, over-current protection, short circuit protection, temperature protection, etc.
- Use of a high quality (A-Grade) MOSFET protective integrated circuit ICs from the solution of Seiko from Japan.
- Ensure a long life of your battery.
Benefits
- Strong load capacity, constant discharge current, high voltage resistance, low internal resistance. The heat sink contributes significantly to cooling.
- The IC itself has a power balancing function. The circuit is simple and reliable.
- Typical voltage detection for each cell. This prevents any battery from being overcharged or over-discharged. Overcurrent and short circuit protection.
- Function is very reliable. Long-term short circuit of the load does not affect the PCB and battery. Temperature protection when charging and discharging.
- Extremely low power consumption. The consumption of the entire device is less than 2.5uA.
- PCB use high corrosion protection, high water resistance and a high resistance ESD compliant coating.
Box contents:
- 6S or 7S BMS with or without temperature sensor
- Instructions and wiring diagram