[340 x 80 cm]
With the high-quality, self-adhesive kitchen back wall film from Druck-Expert you can quickly and easily give your kitchen a new style.
Simply order the desired motif and stick to existing tiles or a suitable flat surface. So your kitchen gets your own personal style. In addition, your kitchen back wall film impresses with its comfort, durability and brilliant colours.
Start with the restyling of your kitchen today.
Great results with little effort
1. Clean the surface (must be free of grease) and allow to dry well
2 | Kitchen back wall film simply apply with the palm of your hand or squeegee
3. Cut out/cut outlets, edges and excess lengths with a cutter
4. Can be glued around the corner
5. Easy, residue-free removal
... its that easy!
Good reasons for kitchen back wall film from Druck-Expert
Further advantages:
+ NOT THIN TRANSPARENT STICKER/STICKERS MADE FROM SOFT MATERIAL
+ Easy covering of tile joints**
+ Highly scratch-resistant surface protection layer
+ Very easy, bubble-free application and cutting
+ Easy to clean and remove
+ Grease splash and heat resistant
Also close to the hob
+ Available in standard tile mirror sizes: Height in cm: 51, 60, 80; Length in cm: 60, 120, 160, 220, 280, 340, 400
+ Semi-gloss surface
+ Long life time and hard wearing
+ Opaque and dimensionally stable
+ Protection against fading (non-fading)
+ Made in Germany
+ Manufacturer: Druck-Expert, Neu-Elm
|
|
|
---|---|---|
|
|
|
|
|
|
|
---|---|---|---|
1. Clean the surface(must be free of grease) and allow to dry well |
2 | Cover paperSimply place the cover paper approx. 10 cm |
3 | Paint back panelSimply apply the kitchen back wall film with the palm of your hand or squeegee |
4. Easy to cut to sizeCut out/off sockets, edges and excess lengths with a cutter. Can be stuck around the corner. |
application instructions for kitchen back wall film
Remove attachments. Remove wall cabinets, sockets, light switches and lights protruding into the kitchen wall. Unscrew the fuse in advance. Silicone joints and strips must also be removed. Measure and clean. Measure the adhesive surface accurately. Clean the surface with spirit or glass cleaner and a lint-free cloth and, if necessary, rub with a dry, lint-free cloth. Prepare foil roll. Roll up the kitchen back wall film roll on the worktop a piece and the protective film approx. 10 cm. Apply film. Apply the lug of the film flush at the beginning of the adhesive surface of the kitchen back wall and apply the squeegee. Remove the protective film piece and stick the film along the back panel. Smoothing & brushing. Smooth the entire kitchen back wall film with the squeegee to remove unevenness or air bubbles. Light switches and sockets can now be uncut. Clean edges. Slide protruding film edges on the worktop with a squeegee behind it. End edges of the kitchen back wall surfaces if necessary. Cut with cutter. Mount attachments. Reattach sockets, light switches, lights, strips and wall cabinets. And youre done
New look for your kitchen - made easy with the Druck-Expert Step by Step assembly instructions for self-adhesive kitchen back wall film.