Feature

●A silver coating made of ceramic does not have a high temperature; if the temperature of the soldering iron should not exceed 280 degrees, the iron is well used, the temperature of the iron is set to 250 degrees.
●PCB of the shock head (ceramic converter). Wiring Instructions:1. The card cannot charge electricity. Cleaning solution cannot be stimulated. Cleaning.3. First tabs, ceramic center tabs are positive, top and the metal column is negative, cannot be reversed
●Features: supply pipe; PCB: 2 ounce; stable performance; radiator; cooling.
●Slide 4. Transduce onto the ceramic film with a silver layer on the negative side, the other is a large silver layer, the smaller one for the negative plate, the welding cable must be welded to the side of the silver layer, the other side of the vibration surface can be glued (this is available with instructions for the transducer. ceramic) in a bibidet;
●5. The larger side of the butt head (with screw holes) the vibrating surface can be glued to the cleaning of the basin floor, the washing pots must be well on the ground. 6. The butt head or head of the ceramic adhesive is firmly glued to the cleaning of the pool floor


Description

Herold 7. Butt heads and coupled to the terminal of the circuit board, a circuit board with maximum shock heads, but also with the use of a butt head. 8. The circuit diagram of the circuit board is as follows: the outputs and negative or negative, connected with the impact of the child, can not choose the wrong one, we have questions, timely tips to ensure safety
Suitable for: ultrasonic cleaning machines.
Power requirements: AC110V (-15 - + 10%), 50Hz, 100W
Sensor: 60 W. Temperature: -10 to 40 °C.
Humidity: 35% to 85%
Frequency converter: 40KHz
Size: 9.8 x 9.3 cm.
Color: Silver
Material: stainless steel.

Package Content 2 x Ultrasonic Cleaner Driver Board
2 x Transducers

Only the above package, the products are not included.
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.