[HSS Hss Set 5-tlg.]
With over 8,500 tools for surface processing and separation of materials, Pferd offers the optimal tool solution for every application.
Particularly suitable for making countersinks for 90° screws.
Workable materials:
Countersink from Pferd are characterised by their particularly sharp, right-hand cutting edges, which achieve very good results even at low cutting speeds. The different designs allow for countersinking and deburring when processing different materials, even in industrial environments.
Advantages:
|
|
|
---|---|---|
HSS DIN 335 C 90°High-performance countersink tools with a countersunk angle of 90° for countersinking 90° screws for all common materials such as steel, cast steel and non-ferrous metals. HSS countersink that can be used universally on almost all materials. |
HSS-E DIN 335 C 90°, design Co5High-performance countersink tools with a countersunk angle of 90° for countersinking 90° screws for particularly tough and hard materials such as alloy and high-strength steel and stainless steel (INOX). Long service life and temperature-resistant design thanks to co-content. Universal use on almost all materials. Long service life. Very good temperature resistance due to co-content. |
HSS DIN 335 C 90° with HC-FEP HICOAT coatingHigh-performance countersink tools with a countersunk angle of 90° for countersinking 90° screws for particularly tough and hard materials such as alloy and high-strength steel and stainless steel. Thanks to the HC-FEP HICOAT coating, they have a high hardness and wear resistance. They are very temperature resistant and have a particularly long service life. Universal use on almost all materials. Very long service life. Can also be used in the higher cutting speed range and without cooling and lubricants. |
Choose the appropriate design depending on the required angle and material to be processed. Use as coolant/lubricant cutting oil or Compressed air. Please note the recommended speeds.
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|
Pferd spiral drill bit steel, pack of 10 | Pferd Twist Drill Inox Pack of 10 | Pferd HSS cone/deburring countersink, 1 piece | Pferd HSS flat countersink with guide pins, 1 piece | Pferd HSS Step Drill Bit 14 Steps 1 Piece | |
Type: | Spiral drill | Spiral drill | Countersink | Flat countersink | Step drill |
Design: | Steel in HSS-G (M2) | INOX in HSS-E Co5 (M35) | HSS | HSS, medium quality (M) | HSS |
Diameter: | 5.00 mm | 5.00 mm | 16.5 mm, shaft diameter 10.00 mm | 15 mm. Shaft diameter: 12.5 mm, pin diameter: 9.0 mm | 4-30 mm (14 steps). Shaft diameter: 10 mm |
Total length: | 86 mm (spiral length 52 mm) | 86 mm (spiral length 52 mm) | 60 mm | 100 mm | 100 mm |
Angle | Tip angle 118°, spiral angle 25-30° | Tip angle 135°, spiral angle 36° | Countersunk angle: 90° | ||
Contents: | 10 x Pferd HSS-G spiral drills | 10 x Pferd HSS-E twist drills | 1 x HSS Countersink | 1 x HSS flat countersink | 1 x HSS step drill |
Machinable materials | Steel, aluminium, brass, bronze, cast, plastics | Steel, stainless steel (INOX), aluminium, brass, bronze, cast iron, titanium, plastics | Steel, cast steel, stainless steel (INOX), non-ferrous metals, cast iron, plastics, other materials | Steel, cast steel, stainless steel (INOX), non-ferrous metals, cast iron, plastics, other materials | Steel, cast steel, stainless steel (INOX), non-ferrous metals, plastics, other materials |
Packaging: | Plastic box | Plastic box | Plastic box | Plastic box | Plastic box |