Product description:
ER25 Collet Set ER25 Collet Chuck 1-16mm Spring Collet for CNC Engraving Milling Lathe Tool Holder 16pcs
Product Features:
Grip range: 1mm to 16mm (1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm).
Material: 65mn
Accuracy: <0.012mm
-
Package includes:
16 x ER25 Collet Set (1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm)
The correct methods for mounting the clamping nut:
- Place the chuck into the pressure cap and gently turn the clamping spring when the eccentric part of the pressure cap dips into the clamping spring groove. Along the direction of the arrow.
Use the same force to press the clamp spring and attach the pressure cap.
- Put the clamp spring and cap together on the chuck body or spindle. Insert them into the clamping hole after wiping the cylindrical shaft. Use a wrench to
press the pressure cap until the tool is stuck before use.
(Note: Avoid fixing the pressure cap that is not installed to avoid damaging the clamp spring.)
- Loosen the pressure cap with a wrench. Take out the chuck or tool and remove the tool. Push out the spring along the direction of the arrow. If required.
replace the other clamping spring.