1. Clean the cavity before first spraying. Put thinner into the gun container and try to filter the inside of the gun to keep it clean.
2. Clean the air cap and nozzle in time after each use (first pour the paint into the cavity, then add thinner and shake the gun with the trigger pressed to try to squeeze out the paint produced inside the gun). If the air cap is too dirty, let the thinner soak for a while before cleaning the air cap. Be careful not to damage the openings of the air cap when cleaning and protect the nozzle, otherwise the atomization effect will be affected.
3. If the aerosol range shrinks after prolonged use, the following problems may occur: First, there is not enough paint in the container to evenly cover the bottom entrance. It is recommended to perform a test after filling the container with paint.
4. If the paint container of the product is leaking, take it out, clean it and put it back in. The problem can be resolved.