Specification:
Material: stainless steel.
Packaging: 4 thresholds (2 front doors, 2 rear doors).
Installation:
① Compare the protection with the car door before installation and make sure it is compatible with your car.
② Clean the dirt on the door sill with a damp towel and wipe it dry.
③After comparing the installation position, peel off the 3M tape and stick it to the correct position.
④ When installing, the temperature is not suitable for less than 15 degrees, otherwise the paste effect will be affected. If the outside temperature is below 37 degrees, you can heat the car door sill first with a heat gun and then with a heat gun for a few minutes.
⑤ Try installation in sunny, rain-free weather. After installation, do not use water for two days to clean the threshold to increase the service life.
NOTE: If you find that this product is not compatible with your car or there is a quality problem with this product, please contact us immediately. We will reply to you as soon as possible and promise to provide you with the best customer service.