Powerful 2EXTREME carburettor with a passage of 17.5 mm.
This affordable and above all robust 17.5 mm tuning carburettor offers a rich performance yield and is therefore ideal for original and sports cylinders.
Please note that these are only pre-tuned and should of course be finely tuned depending on the tuning level. This is the only way to ensure a perfect blend for optimal performance.
Furthermore, the carburettor has an oil and vacuum connection as well as a manual choke, which is operated via a pull.
Technical features:
- Throttle slider 16 mm.
- Main nozzle 95 M6 thread.
- Secondary nozzle 34 M4 thread.
- Choke nozzle 44.
- Needle A12.
- Passage 17.5 mm.
- Connection width air filter side 38 mm (outer diameter).
- Connection width intake side 24 mm (outer diameter).
The carburettor also has 2 connections for the carburettor heater. The carburettor can also be installed on vehicles that do not have a carburettor heater (2 hoses that go from the cylinder head to the carburettor).
Note: The carburettor comes with a basic setting and still needs to be matched to the specific vehicle. Main nozzle, secondary nozzle, needle clip, idle mixture and standing gas must always be adjusted, as each engine runs differently and has other components installed. An incorrectly adjusted carburettor can lead to major engine damage!