Feature(may vary by option.)
●*This is an input 110V-220V, output for the DC 24V power transformer, shell material for high-quality aluminium. The switching power supply with automatic overcurrent shutdown, over voltage shutdown, over temperature shutdown, short circuit protection. Low noise, high temperature resistance, stable output, safe to use.
●*This power supply has a pure copper winding, full power to make the current more stable, and high temperature resistance for more reliable performance.
●*This device has a double input voltage: AC 110V/220V. There is a switch, choose the right voltage before use.
●*There is no fan in the case, quiet operation. Aluminum housing with many holes improves the efficiency of heat dissipation to avoid overheating.
●*Widely used in industrial automation, radio/video, broadcasting, speaker, stereo, LED display, LED module, LED wall, electronic communication, CNC stepping / servo system, chemical electrolysis and electroplating speed control, DC motors.
[DC 3-24 V input AC 110-220 V]
[Stromversorgung Eingang 100-240v Dc Ausgang Dc 12v]
[Input power supply 100-240 V DC output 24 V]
[Switching power supply 110 V & 220 V input 24 V DC output]
Description
*Specification:
Input: AC 110 V/220 V, 50/60 Hz.
Output voltage: DC 24V (regulated by 10%).
Output current: maximum 10 A.
Output power: max. 200 W.
Size: 200 mm / 7.9 inches x 110 mm / 4.3 inches x 50 mm / 2 inches.
Cooling method: natural heat dissipation;
Shell material: aluminium/stainless steel;
Fixed screw hole diameter: 2.5 mm (0.1 inch).
Working Temperature: -20℃~60℃
*Note:
1.110V/220V must be selected by switch before use to avoid damage. Please change the switch to 110V for USA.
2. It comes without installation instructions, power cord, on/off switch and screws. Professional installation by a licensed electrician is highly recommended.
3. High voltage inside, never remove the cover. Not waterproof, for indoor use only.
4. Make sure your device corresponds to the 24 V voltage and a power of less than 200 W. Please do not overload it.
*Connection instructions:
L:AC Power Wire
N: AC neutral conductor;
: Floor;
+V:DC 24V+;
COM: DC 24 V.
+V ADJ: adjustment of the output voltage by 10%.
Translated with www.DeepL.com/Translator (free version)